Struxen for Mac

Constructability review, built for the Mac.

STRUX checks the drawing set alongside you, cites every sheet it used, and leaves the call to you.

A question on paper is cheaper than an RFI in the field.

RFIs on an average project
796
To review and answer each one
$1,080

Navigant Construction Forum, April 2013: a study of 1,362 projects. The $1,080 figure is its estimate, based on data from three U.S. firms.

It works on the sheet, where you do.

  1. Point at it.

    Draw a box round the unit, the room or the run, and say what to check. Type it or say it.

  2. STRUX reads the set.

    The plans of every discipline, the schedules, the details and the project manual. Not just the sheet in front of you.

  3. You make the call.

    The check lands on the sheet with its evidence and the sheets it read. Make it an issue, or mark it not an issue.

Problem found Boiler emergency shutdown switches

“Two EPO switches are on P-303 by the north-west doors; no power or wiring on the E sheets, and none at the east door.”

Read: P-303, P-409, M-706, M-700, E-101C, E-302

Checks you can verify. Calls you make.

  • Every check shows its sources.

    Each one lists the sheets and spec sections it read. Click one and the sheet opens at the place.

  • Cannot tell is an answer.

    When the set does not settle it, STRUX says what is missing instead of guessing.

  • Nothing is decided without you.

    A check is a draft until you confirm it. Your issues, in your words, in your review.

  • The build is the review.

    SI agents check the drawings trade against trade. Whatever won’t go together is an error or omission in the set, and a person decides.

A native review editor.

Built for whole drawing sets, on the Mac you already use.

  • Projects and issue sets

    Every issue of a job in one project, from DD to CD, with the sheets indexed by discipline.

  • Find anything

    Go to a sheet by number or title, and search the text of the whole set, scanned sheets included.

  • What changed

    See which sheets changed since the last issue, step through the changes, and carry your checks forward.

  • A full markup set

    Clouds, callouts, text, arrows, highlights and stamps, with a tool chest for the ones you reuse.

  • Measure and count

    Calibrate a sheet and measure on it. Find a symbol and count every one.

  • Sheet links and split view

    Follow a callout to its detail, and keep two sheets side by side.

  • Works with the files you have

    Plain PDFs in, plain PDFs out. Markups travel as XFDF and FDF.

Find it on the drawings, not on site.